ASME B16.5 · ASTM A105 · stock and made to order
10″ Class 2500 Weld Neck Flange — ASME B16.5
10″ Class 2500 weld neck flange to ASME B16.5, machined from ASTM A105. Outside diameter 673.1 mm, thickness 165.1 mm, 12 bolt holes on a 539.8 mm circle, approximate weight 488 kg. Available with raised face, flat face or the facing specified on your drawing.
Size
10″ / DN250
Standard
ASME B16.5 (ASME B16.5-2025)
Pressure rating
Class 2500
Outside diameter
673.1 mm (26.5″)
Thickness
165.1 mm (6.5″)
Bolt circle
539.8 mm (21.25″)
Approx. weight
488 kg
Full dimensions — 10″ Class 2500
| Size | DN | OD | Thickness | RF Ø | Bolt circle | Bolts | Hub Ø | Length | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1/2″ | 15 | 133.4 mm (5.25″) | 30.2 mm (1.19″) | 35.1 mm (1.38″) | 88.9 mm (3.5″) | 4 × Ø22.2 mm (0.87″) | 42.9 mm (1.69″) | 73.2 mm (2.88″) | 3.2 kg | Details → |
| 3/4″ | 20 | 139.7 mm (5.5″) | 31.8 mm (1.25″) | 42.9 mm (1.69″) | 95.3 mm (3.75″) | 4 × Ø22.2 mm (0.87″) | 50.8 mm (2″) | 79.2 mm (3.12″) | 3.6 kg | Details → |
| 1″ | 25 | 158.8 mm (6.25″) | 35.1 mm (1.38″) | 50.8 mm (2″) | 108 mm (4.25″) | 4 × Ø25.4 mm (1″) | 57.2 mm (2.25″) | 88.9 mm (3.5″) | 5.4 kg | Details → |
| 1¼″ | 32 | 184.2 mm (7.25″) | 38.1 mm (1.5″) | 63.5 mm (2.5″) | 130 mm (5.12″) | 4 × Ø28.6 mm (1.13″) | 73.2 mm (2.88″) | 95.3 mm (3.75″) | 7.7 kg | Details → |
| 1½″ | 40 | 203.2 mm (8″) | 44.5 mm (1.75″) | 73.2 mm (2.88″) | 146.1 mm (5.75″) | 4 × Ø31.8 mm (1.25″) | 79.2 mm (3.12″) | 111.3 mm (4.38″) | 11.3 kg | Details → |
| 2″ | 50 | 235 mm (9.25″) | 50.8 mm (2″) | 91.9 mm (3.62″) | 171.5 mm (6.75″) | 8 × Ø28.6 mm (1.13″) | 95.3 mm (3.75″) | 127 mm (5″) | 19.1 kg | Details → |
| 2½″ | 65 | 266.7 mm (10.5″) | 57.2 mm (2.25″) | 104.6 mm (4.12″) | 196.9 mm (7.75″) | 8 × Ø31.8 mm (1.25″) | 114.3 mm (4.5″) | 142.7 mm (5.62″) | 23.6 kg | Details → |
| 3″ | 80 | 304.8 mm (12″) | 66.5 mm (2.62″) | 127 mm (5″) | 228.6 mm (9″) | 8 × Ø34.9 mm (1.37″) | 133.4 mm (5.25″) | 168.1 mm (6.62″) | 42.6 kg | Details → |
| 4″ | 100 | 355.6 mm (14″) | 76.2 mm (3″) | 157.2 mm (6.19″) | 273.1 mm (10.75″) | 8 × Ø41.3 mm (1.63″) | 165.1 mm (6.5″) | 190.5 mm (7.5″) | 65.8 kg | Details → |
| 5″ | 125 | 419.1 mm (16.5″) | 91.9 mm (3.62″) | 185.7 mm (7.31″) | 323.9 mm (12.75″) | 8 × Ø47.6 mm (1.87″) | 203.2 mm (8″) | 228.6 mm (9″) | 111 kg | Details → |
| 6″ | 150 | 482.6 mm (19″) | 108 mm (4.25″) | 215.9 mm (8.5″) | 368.3 mm (14.5″) | 8 × Ø54 mm (2.13″) | 235 mm (9.25″) | 273.1 mm (10.75″) | 172 kg | Details → |
| 8″ | 200 | 552.5 mm (21.75″) | 127 mm (5″) | 269.7 mm (10.62″) | 438.2 mm (17.25″) | 12 × Ø54 mm (2.13″) | 304.8 mm (12″) | 317.5 mm (12.5″) | 263 kg | Details → |
| 10″ (this size) | 250 | 673.1 mm (26.5″) | 165.1 mm (6.5″) | 323.9 mm (12.75″) | 539.8 mm (21.25″) | 12 × Ø66.7 mm (2.63″) | 374.7 mm (14.75″) | 419.1 mm (16.5″) | 488 kg | Details → |
| 12″ | 300 | 762 mm (30″) | 184.2 mm (7.25″) | 381 mm (15″) | 619.3 mm (24.38″) | 12 × Ø73 mm (2.87″) | 441.5 mm (17.38″) | 463.6 mm (18.25″) | 692 kg | Details → |
Published ASME B16.5 dimensions for every Class 2500 size in this product family.
Dimensions in millimetres; the inch equivalent is shown in brackets. Bolt hole diameter applies to through-holes. For stud length, gasket and bolting selection, match the gasket and bolts to B16.5.
What Class 2500 means in service
Class 2500 in ASTM A105 (material group 1.1) is rated 6,170 psi (425.1 bar) at 38 °C (100 °F) in the ASME B16.5-2025 tables, and derates as temperature rises. Read the value for your design temperature and material group from the 2025 pressure–temperature table.
ASME classes are not fixed pressures. For ASTM A105 (material group 1.1) the ASME B16.5-2025 ambient rating is 285 psi (19.6 bar) at Class 150, 740 psi (51.0 bar) at Class 300, 985 psi (68.0 bar) at Class 400, 1,480 psi (102.0 bar) at Class 600, 2,220 psi (153.1 bar) at Class 900, 3,705 psi (255.1 bar) at Class 1500 and 6,170 psi (425.1 bar) at Class 2500 at 38 °C (100 °F), derating as temperature rises. The 2025 edition revised the rating tables (record 23-2509); these are the 2025 values and the full temperature tables are on the ASME B16.5 pressure-ratings page.
Facing and materials
Raised face (RF) is standard: 1.5 mm high for Classes 150 and 300, 6.4 mm for Classes 400 to 2500, added to the minimum flange thickness. Flat face (FF) and ring-type joint (RTJ) faces are available on request.
- ASTM A105 / A105N
- ASTM A350 LF2
- ASTM A182 F304/F316L
- ASTM A182 F11/F22/F91
- ASTM A182 F51/F53
Other grades, impact-tested heats and NACE MR0175 requirements are quoted on request. Material certificates to EN 10204 3.1 are issued against the same heat number as the dimensional report.
Inspection and delivery
- Dimensional inspection against the B16.5 table for 10″ Class 2500
- Heat number stamped on the rim; EN 10204 3.1 certificate issued
- PMI on stainless and alloy heats; UT/RT on request
- Anti-rust oil, plywood case or pallet, with packing list and MTC
- Typical lead time 7–15 days for carbon steel stock sizes, 20–30 days for alloys
Other sizes in Class 2500
Request a quotation
10″ Class 2500 Weld Neck Flange
Tell us the quantity, face type, material and delivery port. We will confirm price, lead time and the applicable certificate within one business day.
Send an Inquiry
Send drawings, dimensions or a standard reference. Our sales engineers reply within 24 hours on business days.