JIS B2220 · SS400 / S25C · stock and made to order
225A 5K Blind (BL) Flange — JIS B2220
225A 5K blind flange to JIS B2220, machined from SS400 / S25C. Outside diameter 345 mm, thickness 20 mm, 12 bolt holes on a 305 mm circle, approximate weight 13.9 kg. Available with raised face, flat face or the facing specified on your drawing.
Size
225A / DN225
Standard
JIS B2220 (JIS B2220:2012)
Pressure rating
5K
Outside diameter
345 mm
Thickness
20 mm
Bolt circle
305 mm
Approx. weight
13.9 kg
Full dimensions — 225A 5K
| Size | DN | OD | Thickness | RF Ø | Bolt circle | Bolts | Weight | |
|---|---|---|---|---|---|---|---|---|
| 10A | 10 | 75 mm | 9 mm | 39 mm | 55 mm | 4 × Ø12 mm | 0.3 kg | Details → |
| 15A | 15 | 80 mm | 9 mm | 44 mm | 60 mm | 4 × Ø12 mm | 0.33 kg | Details → |
| 20A | 20 | 85 mm | 10 mm | 49 mm | 65 mm | 4 × Ø12 mm | 0.41 kg | Details → |
| 25A | 25 | 95 mm | 10 mm | 59 mm | 75 mm | 4 × Ø12 mm | 0.52 kg | Details → |
| 32A | 32 | 115 mm | 12 mm | 70 mm | 90 mm | 4 × Ø15 mm | 0.91 kg | Details → |
| 40A | 40 | 120 mm | 12 mm | 75 mm | 95 mm | 4 × Ø15 mm | 1 kg | Details → |
| 50A | 50 | 130 mm | 14 mm | 85 mm | 105 mm | 4 × Ø15 mm | 1.38 kg | Details → |
| 65A | 65 | 155 mm | 14 mm | 110 mm | 130 mm | 4 × Ø15 mm | 2 kg | Details → |
| 80A | 80 | 180 mm | 14 mm | 121 mm | 145 mm | 4 × Ø19 mm | 2.67 kg | Details → |
| 90A | 90 | 190 mm | 14 mm | 131 mm | 155 mm | 4 × Ø19 mm | 2.99 kg | Details → |
| 100A | 100 | 200 mm | 16 mm | 141 mm | 165 mm | 8 × Ø19 mm | 3.66 kg | Details → |
| 125A | 125 | 235 mm | 16 mm | 176 mm | 200 mm | 8 × Ø19 mm | 5.16 kg | Details → |
| 150A | 150 | 265 mm | 18 mm | 206 mm | 230 mm | 8 × Ø19 mm | 7.47 kg | Details → |
| 175A | 175 | 300 mm | 18 mm | 232 mm | 260 mm | 8 × Ø23 mm | 9.52 kg | Details → |
| 200A | 200 | 320 mm | 20 mm | 252 mm | 280 mm | 8 × Ø23 mm | 12.1 kg | Details → |
| 225A (this size) | 225 | 345 mm | 20 mm | 277 mm | 305 mm | 12 × Ø23 mm | 13.9 kg | Details → |
| 250A | 250 | 385 mm | 22 mm | 317 mm | 345 mm | 12 × Ø23 mm | 19.2 kg | Details → |
| 300A | 300 | 430 mm | 22 mm | 360 mm | 390 mm | 12 × Ø23 mm | 24.2 kg | Details → |
| 350A | 350 | 480 mm | 24 mm | 403 mm | 435 mm | 12 × Ø25 mm | 33 kg | Details → |
| 400A | 400 | 540 mm | 24 mm | 463 mm | 495 mm | 16 × Ø25 mm | 41.7 kg | Details → |
| 450A | 450 | 605 mm | 24 mm | 523 mm | 555 mm | 16 × Ø25 mm | 52.7 kg | Details → |
| 500A | 500 | 655 mm | 24 mm | 573 mm | 605 mm | 20 × Ø25 mm | 61.6 kg | Details → |
| 550A | 550 | 720 mm | 26 mm | 630 mm | 665 mm | 20 × Ø27 mm | 80.8 kg | Details → |
| 600A | 600 | 770 mm | 26 mm | 680 mm | 715 mm | 20 × Ø27 mm | 92.7 kg | Details → |
Published JIS B2220 dimensions for every 5K size in this product family.
Dimensions in millimetres. Bolt hole diameter applies to through-holes. For stud length, gasket and bolting selection, match the gasket and bolts to JIS B2220.
What 5K means in service
JIS 5K is a nominal rating of approximately 0.5 MPa (5 kgf/cm²). The JIS B2220 Table 11 maximum working pressure for material group 1.1, Division I is higher than the nominal figure at up to 120 °C, then derates with temperature; read the table for your material group and division.
JIS K ratings are kgf/cm² nominal: 5K ≈ 0.5 MPa, 10K ≈ 1.0 MPa, 16K ≈ 1.6 MPa, 20K ≈ 2.0 MPa and 30K ≈ 3.0 MPa. The published maximum working pressure is higher or lower than the nominal figure depending on material group and division — for material group 1.1, Division I, the JIS B2220 Table 11 value at up to 120 °C is 0.7 MPa for 5K, 1.4 MPa for 10K, 2.7 MPa for 16K, 3.4 MPa for 20K, 5.1 MPa for 30K, 6.8 MPa for 40K and 10.7 MPa for 63K. Allowable pressure falls with temperature, and JIS bolt patterns differ from ASME classes of similar pressure.
Facing and materials
Raised face (RF) is standard for steel JIS flanges; the raised-face height is 2 mm. Flat face is available on request.
- SS400
- S25C
- SUS304
- SUS316
- SCS13 / SCS14 (cast)
Other grades, impact-tested heats and NACE MR0175 requirements are quoted on request. Material certificates to EN 10204 3.1 are issued against the same heat number as the dimensional report.
Inspection and delivery
- Dimensional inspection against the JIS B2220 table for 225A 5K
- Heat number stamped on the rim; EN 10204 3.1 certificate issued
- PMI on stainless and alloy heats; UT/RT on request
- Anti-rust oil, plywood case or pallet, with packing list and MTC
- Typical lead time 7–15 days for carbon steel stock sizes, 20–30 days for alloys
Other sizes in 5K
Request a quotation
225A 5K Blind (BL) Flange
Tell us the quantity, face type, material and delivery port. We will confirm price, lead time and the applicable certificate within one business day.
Send an Inquiry
Send drawings, dimensions or a standard reference. Our sales engineers reply within 24 hours on business days.