JIS B2220 · SS400 / S25C · stock and made to order
90A 20K Slip-On Plate (SOP) Flange — JIS B2220
90A 20K slip-on plate flange to JIS B2220, machined from SS400 / S25C. Outside diameter 210 mm, thickness 24 mm, 8 bolt holes on a 170 mm circle. Available with raised face, flat face or the facing specified on your drawing.
Size
90A / DN90
Standard
JIS B2220 (JIS B2220:2012)
Pressure rating
20K
Outside diameter
210 mm
Thickness
24 mm
Bolt circle
170 mm
Full dimensions — 90A 20K
| Size | DN | OD | Thickness | RF Ø | Bolt circle | Bolts | |
|---|---|---|---|---|---|---|---|
| 10A | 10 | 90 mm | 14 mm | 46 mm | 65 mm | 4 × Ø15 mm | Details → |
| 15A | 15 | 95 mm | 14 mm | 51 mm | 70 mm | 4 × Ø15 mm | Details → |
| 20A | 20 | 100 mm | 16 mm | 56 mm | 75 mm | 4 × Ø15 mm | Details → |
| 25A | 25 | 125 mm | 16 mm | 67 mm | 90 mm | 4 × Ø19 mm | Details → |
| 32A | 32 | 135 mm | 18 mm | 76 mm | 100 mm | 4 × Ø19 mm | Details → |
| 40A | 40 | 140 mm | 18 mm | 81 mm | 105 mm | 4 × Ø19 mm | Details → |
| 50A | 50 | 155 mm | 18 mm | 96 mm | 120 mm | 8 × Ø19 mm | Details → |
| 65A | 65 | 175 mm | 20 mm | 116 mm | 140 mm | 8 × Ø19 mm | Details → |
| 80A | 80 | 200 mm | 22 mm | 132 mm | 160 mm | 8 × Ø23 mm | Details → |
| 90A (this size) | 90 | 210 mm | 24 mm | 145 mm | 170 mm | 8 × Ø23 mm | Details → |
| 100A | 100 | 225 mm | 24 mm | 160 mm | 185 mm | 8 × Ø23 mm | Details → |
| 125A | 125 | 270 mm | 26 mm | 195 mm | 225 mm | 8 × Ø25 mm | Details → |
| 150A | 150 | 305 mm | 28 mm | 230 mm | 260 mm | 12 × Ø25 mm | Details → |
| 200A | 200 | 350 mm | 30 mm | 275 mm | 305 mm | 12 × Ø25 mm | Details → |
| 250A | 250 | 430 mm | 34 mm | 345 mm | 380 mm | 12 × Ø27 mm | Details → |
| 300A | 300 | 480 mm | 36 mm | 395 mm | 430 mm | 16 × Ø27 mm | Details → |
| 350A | 350 | 540 mm | 40 mm | 440 mm | 480 mm | 16 × Ø33 mm | Details → |
| 400A | 400 | 605 mm | 46 mm | 495 mm | 540 mm | 16 × Ø33 mm | Details → |
| 450A | 450 | 675 mm | 48 mm | 560 mm | 605 mm | 20 × Ø33 mm | Details → |
| 500A | 500 | 730 mm | 50 mm | 615 mm | 660 mm | 20 × Ø33 mm | Details → |
| 550A | 550 | 795 mm | 52 mm | 670 mm | 720 mm | 20 × Ø39 mm | Details → |
| 600A | 600 | 845 mm | 54 mm | 720 mm | 770 mm | 24 × Ø39 mm | Details → |
Published JIS B2220 dimensions for every 20K size in this product family.
Dimensions in millimetres. Bolt hole diameter applies to through-holes. For stud length, gasket and bolting selection, match the gasket and bolts to JIS B2220.
What 20K means in service
JIS 20K is a nominal rating of approximately 2 MPa (20 kgf/cm²). The JIS B2220 Table 11 maximum working pressure for material group 1.1, Division I is higher than the nominal figure at up to 120 °C, then derates with temperature; read the table for your material group and division.
JIS K ratings are kgf/cm² nominal: 5K ≈ 0.5 MPa, 10K ≈ 1.0 MPa, 16K ≈ 1.6 MPa, 20K ≈ 2.0 MPa and 30K ≈ 3.0 MPa. The published maximum working pressure is higher or lower than the nominal figure depending on material group and division — for material group 1.1, Division I, the JIS B2220 Table 11 value at up to 120 °C is 0.7 MPa for 5K, 1.4 MPa for 10K, 2.7 MPa for 16K, 3.4 MPa for 20K, 5.1 MPa for 30K, 6.8 MPa for 40K and 10.7 MPa for 63K. Allowable pressure falls with temperature, and JIS bolt patterns differ from ASME classes of similar pressure.
Facing and materials
Raised face (RF) is standard for steel JIS flanges; the raised-face height is 2 mm. Flat face is available on request.
- SS400
- S25C
- SUS304
- SUS316
- SCS13 / SCS14 (cast)
Other grades, impact-tested heats and NACE MR0175 requirements are quoted on request. Material certificates to EN 10204 3.1 are issued against the same heat number as the dimensional report.
Inspection and delivery
- Dimensional inspection against the JIS B2220 table for 90A 20K
- Heat number stamped on the rim; EN 10204 3.1 certificate issued
- PMI on stainless and alloy heats; UT/RT on request
- Anti-rust oil, plywood case or pallet, with packing list and MTC
- Typical lead time 7–15 days for carbon steel stock sizes, 20–30 days for alloys
Other sizes in 20K
Request a quotation
90A 20K Slip-On Plate (SOP) Flange
Tell us the quantity, face type, material and delivery port. We will confirm price, lead time and the applicable certificate within one business day.
Send an Inquiry
Send drawings, dimensions or a standard reference. Our sales engineers reply within 24 hours on business days.