EN 1092-1 · P250GH / S235JR · stock and made to order
DN125 PN40 Slip-On (type 12) Flange — EN 1092-1
DN125 PN40 slip-on flange to EN 1092-1, machined from P250GH / S235JR. Outside diameter 270 mm, thickness 26 mm, 8 bolt holes on a 220 mm circle. Available with raised face, flat face or the facing specified on your drawing.
Size
DN125
Standard
EN 1092-1 (EN 1092-1:2018)
Pressure rating
PN40
Outside diameter
270 mm
Thickness
26 mm
Bolt circle
220 mm
Full dimensions — DN125 PN40
| Size | DN | OD | Thickness | RF Ø | Bolt circle | Bolts | Hub Ø | Length | |
|---|---|---|---|---|---|---|---|---|---|
| DN10 | 10 | 90 mm | 16 mm | 40 mm | 60 mm | 4 × Ø14 mm | 30 mm | 22 mm | Details → |
| DN15 | 15 | 95 mm | 16 mm | 45 mm | 65 mm | 4 × Ø14 mm | 35 mm | 22 mm | Details → |
| DN20 | 20 | 105 mm | 18 mm | 58 mm | 75 mm | 4 × Ø14 mm | 45 mm | 26 mm | Details → |
| DN25 | 25 | 115 mm | 18 mm | 68 mm | 85 mm | 4 × Ø14 mm | 52 mm | 28 mm | Details → |
| DN32 | 32 | 140 mm | 18 mm | 78 mm | 100 mm | 4 × Ø18 mm | 60 mm | 30 mm | Details → |
| DN40 | 40 | 150 mm | 18 mm | 88 mm | 110 mm | 4 × Ø18 mm | 70 mm | 32 mm | Details → |
| DN50 | 50 | 165 mm | 20 mm | 102 mm | 125 mm | 4 × Ø18 mm | 84 mm | 34 mm | Details → |
| DN65 | 65 | 185 mm | 22 mm | 122 mm | 145 mm | 8 × Ø18 mm | 104 mm | 38 mm | Details → |
| DN80 | 80 | 200 mm | 24 mm | 138 mm | 160 mm | 8 × Ø18 mm | 118 mm | 40 mm | Details → |
| DN100 | 100 | 235 mm | 24 mm | 162 mm | 190 mm | 8 × Ø22 mm | 145 mm | 44 mm | Details → |
| DN125 (this size) | 125 | 270 mm | 26 mm | 188 mm | 220 mm | 8 × Ø26 mm | 170 mm | 48 mm | Details → |
| DN150 | 150 | 300 mm | 28 mm | 218 mm | 250 mm | 8 × Ø26 mm | 200 mm | 52 mm | Details → |
| DN200 | 200 | 375 mm | 34 mm | 285 mm | 320 mm | 12 × Ø30 mm | 260 mm | 52 mm | Details → |
| DN250 | 250 | 450 mm | 38 mm | 345 mm | 385 mm | 12 × Ø33 mm | 312 mm | 60 mm | Details → |
| DN300 | 300 | 515 mm | 42 mm | 410 mm | 450 mm | 16 × Ø33 mm | 380 mm | 67 mm | Details → |
| DN350 | 350 | 580 mm | 46 mm | 465 mm | 510 mm | 16 × Ø36 mm | 424 mm | 72 mm | Details → |
| DN400 | 400 | 660 mm | 50 mm | 535 mm | 585 mm | 16 × Ø39 mm | 478 mm | 78 mm | Details → |
| DN450 | 450 | 685 mm | 57 mm | 560 mm | 610 mm | 20 × Ø39 mm | 522 mm | 84 mm | Details → |
| DN500 | 500 | 755 mm | 57 mm | 615 mm | 670 mm | 20 × Ø42 mm | 576 mm | 90 mm | Details → |
| DN600 | 600 | 890 mm | 72 mm | 735 mm | 795 mm | 20 × Ø48 mm | 686 mm | 100 mm | Details → |
Published EN 1092-1 dimensions for every PN40 size in this product family.
Dimensions in millimetres. Bolt hole diameter applies to through-holes. For stud length, gasket and bolting selection, match the gasket and bolts to EN 1092-1.
What PN40 means in service
PN40 is a nominal pressure of 40 bar (4 MPa) at ambient temperature for EN material group 1, derating with temperature per EN 1092-1.
EN 1092-1 uses PN (nominal pressure) ratings in bar: PN6, PN10, PN16, PN25 and PN40. PN16 means 16 bar nominal at ambient temperature for EN material group 1, derating with temperature per the EN 1092-1 tables. EN PN ratings are not equivalent to ASME classes in dimensions, even where the pressure looks similar.
Facing and materials
Raised face (RF) with a 2 mm face height is standard; flat face (FF) and groove (tongue) facings are available.
- P250GH
- P265GH
- S235JR
- S355J2
- 1.4301 / 1.4404
- 1.4571
Other grades, impact-tested heats and NACE MR0175 requirements are quoted on request. Material certificates to EN 10204 3.1 are issued against the same heat number as the dimensional report.
Inspection and delivery
- Dimensional inspection against the EN 1092-1 table for DN125 PN40
- Heat number stamped on the rim; EN 10204 3.1 certificate issued
- PMI on stainless and alloy heats; UT/RT on request
- Anti-rust oil, plywood case or pallet, with packing list and MTC
- Typical lead time 7–15 days for carbon steel stock sizes, 20–30 days for alloys
Other sizes in PN40
Request a quotation
DN125 PN40 Slip-On (type 12) Flange
Tell us the quantity, face type, material and delivery port. We will confirm price, lead time and the applicable certificate within one business day.
Send an Inquiry
Send drawings, dimensions or a standard reference. Our sales engineers reply within 24 hours on business days.