EN 1092-1 · P250GH / S235JR · stock and made to order
DN20 PN10 Slip-On (type 12) Flange — EN 1092-1
DN20 PN10 slip-on flange to EN 1092-1, machined from P250GH / S235JR. Outside diameter 105 mm, thickness 18 mm, 4 bolt holes on a 75 mm circle. Available with raised face, flat face or the facing specified on your drawing.
Size
DN20
Standard
EN 1092-1 (EN 1092-1:2018)
Pressure rating
PN10
Outside diameter
105 mm
Thickness
18 mm
Bolt circle
75 mm
Full dimensions — DN20 PN10
| Size | DN | OD | Thickness | RF Ø | Bolt circle | Bolts | Hub Ø | Length | |
|---|---|---|---|---|---|---|---|---|---|
| DN10 | 10 | 90 mm | 16 mm | 40 mm | 60 mm | 4 × Ø14 mm | 30 mm | 22 mm | Details → |
| DN15 | 15 | 95 mm | 16 mm | 45 mm | 65 mm | 4 × Ø14 mm | 35 mm | 22 mm | Details → |
| DN20 (this size) | 20 | 105 mm | 18 mm | 58 mm | 75 mm | 4 × Ø14 mm | 45 mm | 26 mm | Details → |
| DN25 | 25 | 115 mm | 18 mm | 68 mm | 85 mm | 4 × Ø14 mm | 52 mm | 28 mm | Details → |
| DN32 | 32 | 140 mm | 18 mm | 78 mm | 100 mm | 4 × Ø18 mm | 60 mm | 30 mm | Details → |
| DN40 | 40 | 150 mm | 18 mm | 88 mm | 110 mm | 4 × Ø18 mm | 70 mm | 32 mm | Details → |
| DN50 | 50 | 165 mm | 18 mm | 102 mm | 125 mm | 4 × Ø18 mm | 84 mm | 28 mm | Details → |
| DN65 | 65 | 185 mm | 18 mm | 122 mm | 145 mm | 8 × Ø18 mm | 104 mm | 32 mm | Details → |
| DN80 | 80 | 200 mm | 20 mm | 138 mm | 160 mm | 8 × Ø18 mm | 118 mm | 34 mm | Details → |
| DN100 | 100 | 220 mm | 20 mm | 158 mm | 180 mm | 8 × Ø18 mm | 140 mm | 40 mm | Details → |
| DN125 | 125 | 250 mm | 22 mm | 188 mm | 210 mm | 8 × Ø18 mm | 168 mm | 44 mm | Details → |
| DN150 | 150 | 285 mm | 22 mm | 212 mm | 240 mm | 8 × Ø22 mm | 195 mm | 44 mm | Details → |
| DN200 | 200 | 340 mm | 24 mm | 268 mm | 295 mm | 8 × Ø22 mm | 246 mm | 44 mm | Details → |
| DN250 | 250 | 395 mm | 26 mm | 320 mm | 350 mm | 12 × Ø22 mm | 298 mm | 46 mm | Details → |
| DN300 | 300 | 445 mm | 26 mm | 370 mm | 400 mm | 12 × Ø22 mm | 350 mm | 46 mm | Details → |
| DN350 | 350 | 505 mm | 26 mm | 430 mm | 460 mm | 16 × Ø22 mm | 400 mm | 53 mm | Details → |
| DN400 | 400 | 565 mm | 26 mm | 482 mm | 515 mm | 16 × Ø26 mm | 456 mm | 57 mm | Details → |
| DN450 | 450 | 615 mm | 28 mm | 532 mm | 565 mm | 20 × Ø26 mm | 502 mm | 63 mm | Details → |
| DN500 | 500 | 670 mm | 28 mm | 585 mm | 620 mm | 20 × Ø26 mm | 559 mm | 67 mm | Details → |
| DN600 | 600 | 780 mm | 30 mm | 685 mm | 725 mm | 20 × Ø30 mm | 658 mm | 75 mm | Details → |
Published EN 1092-1 dimensions for every PN10 size in this product family.
Dimensions in millimetres. Bolt hole diameter applies to through-holes. For stud length, gasket and bolting selection, match the gasket and bolts to EN 1092-1.
What PN10 means in service
PN10 is a nominal pressure of 10 bar (1 MPa) at ambient temperature for EN material group 1, derating with temperature per EN 1092-1.
EN 1092-1 uses PN (nominal pressure) ratings in bar: PN6, PN10, PN16, PN25 and PN40. PN16 means 16 bar nominal at ambient temperature for EN material group 1, derating with temperature per the EN 1092-1 tables. EN PN ratings are not equivalent to ASME classes in dimensions, even where the pressure looks similar.
Facing and materials
Raised face (RF) with a 2 mm face height is standard; flat face (FF) and groove (tongue) facings are available.
- P250GH
- P265GH
- S235JR
- S355J2
- 1.4301 / 1.4404
- 1.4571
Other grades, impact-tested heats and NACE MR0175 requirements are quoted on request. Material certificates to EN 10204 3.1 are issued against the same heat number as the dimensional report.
Inspection and delivery
- Dimensional inspection against the EN 1092-1 table for DN20 PN10
- Heat number stamped on the rim; EN 10204 3.1 certificate issued
- PMI on stainless and alloy heats; UT/RT on request
- Anti-rust oil, plywood case or pallet, with packing list and MTC
- Typical lead time 7–15 days for carbon steel stock sizes, 20–30 days for alloys
Other sizes in PN10
Request a quotation
DN20 PN10 Slip-On (type 12) Flange
Tell us the quantity, face type, material and delivery port. We will confirm price, lead time and the applicable certificate within one business day.
Send an Inquiry
Send drawings, dimensions or a standard reference. Our sales engineers reply within 24 hours on business days.