EN 1092-1 · P250GH / S235JR · stock and made to order
DN450 PN25 Slip-On (type 12) Flange — EN 1092-1
DN450 PN25 slip-on flange to EN 1092-1, machined from P250GH / S235JR. Outside diameter 670 mm, thickness 46 mm, 20 bolt holes on a 600 mm circle. Available with raised face, flat face or the facing specified on your drawing.
Size
DN450
Standard
EN 1092-1 (EN 1092-1:2018)
Pressure rating
PN25
Outside diameter
670 mm
Thickness
46 mm
Bolt circle
600 mm
Full dimensions — DN450 PN25
| Size | DN | OD | Thickness | RF Ø | Bolt circle | Bolts | Hub Ø | Length | |
|---|---|---|---|---|---|---|---|---|---|
| DN10 | 10 | 90 mm | 16 mm | 40 mm | 60 mm | 4 × Ø14 mm | 30 mm | 22 mm | Details → |
| DN15 | 15 | 95 mm | 16 mm | 45 mm | 65 mm | 4 × Ø14 mm | 35 mm | 22 mm | Details → |
| DN20 | 20 | 105 mm | 18 mm | 58 mm | 75 mm | 4 × Ø14 mm | 45 mm | 26 mm | Details → |
| DN25 | 25 | 115 mm | 18 mm | 68 mm | 85 mm | 4 × Ø14 mm | 52 mm | 28 mm | Details → |
| DN32 | 32 | 140 mm | 18 mm | 78 mm | 100 mm | 4 × Ø18 mm | 60 mm | 30 mm | Details → |
| DN40 | 40 | 150 mm | 18 mm | 88 mm | 110 mm | 4 × Ø18 mm | 70 mm | 32 mm | Details → |
| DN50 | 50 | 165 mm | 20 mm | 102 mm | 125 mm | 4 × Ø18 mm | 84 mm | 34 mm | Details → |
| DN65 | 65 | 185 mm | 22 mm | 122 mm | 145 mm | 8 × Ø18 mm | 104 mm | 38 mm | Details → |
| DN80 | 80 | 200 mm | 24 mm | 138 mm | 160 mm | 8 × Ø18 mm | 118 mm | 40 mm | Details → |
| DN100 | 100 | 235 mm | 24 mm | 162 mm | 190 mm | 8 × Ø22 mm | 145 mm | 44 mm | Details → |
| DN125 | 125 | 270 mm | 26 mm | 188 mm | 220 mm | 8 × Ø26 mm | 170 mm | 48 mm | Details → |
| DN150 | 150 | 300 mm | 28 mm | 218 mm | 250 mm | 8 × Ø26 mm | 200 mm | 52 mm | Details → |
| DN200 | 200 | 360 mm | 30 mm | 278 mm | 310 mm | 12 × Ø26 mm | 256 mm | 52 mm | Details → |
| DN250 | 250 | 425 mm | 32 mm | 335 mm | 370 mm | 12 × Ø30 mm | 310 mm | 60 mm | Details → |
| DN300 | 300 | 485 mm | 34 mm | 395 mm | 430 mm | 16 × Ø30 mm | 364 mm | 67 mm | Details → |
| DN350 | 350 | 555 mm | 38 mm | 450 mm | 490 mm | 16 × Ø33 mm | 418 mm | 72 mm | Details → |
| DN400 | 400 | 620 mm | 40 mm | 505 mm | 550 mm | 16 × Ø36 mm | 472 mm | 78 mm | Details → |
| DN450 (this size) | 450 | 670 mm | 46 mm | 555 mm | 600 mm | 20 × Ø36 mm | 520 mm | 84 mm | Details → |
| DN500 | 500 | 730 mm | 48 mm | 615 mm | 660 mm | 20 × Ø36 mm | 580 mm | 90 mm | Details → |
| DN600 | 600 | 845 mm | 48 mm | 720 mm | 770 mm | 20 × Ø39 mm | 684 mm | 100 mm | Details → |
Published EN 1092-1 dimensions for every PN25 size in this product family.
Dimensions in millimetres. Bolt hole diameter applies to through-holes. For stud length, gasket and bolting selection, match the gasket and bolts to EN 1092-1.
What PN25 means in service
PN25 is a nominal pressure of 25 bar (2.5 MPa) at ambient temperature for EN material group 1, derating with temperature per EN 1092-1.
EN 1092-1 uses PN (nominal pressure) ratings in bar: PN6, PN10, PN16, PN25 and PN40. PN16 means 16 bar nominal at ambient temperature for EN material group 1, derating with temperature per the EN 1092-1 tables. EN PN ratings are not equivalent to ASME classes in dimensions, even where the pressure looks similar.
Facing and materials
Raised face (RF) with a 2 mm face height is standard; flat face (FF) and groove (tongue) facings are available.
- P250GH
- P265GH
- S235JR
- S355J2
- 1.4301 / 1.4404
- 1.4571
Other grades, impact-tested heats and NACE MR0175 requirements are quoted on request. Material certificates to EN 10204 3.1 are issued against the same heat number as the dimensional report.
Inspection and delivery
- Dimensional inspection against the EN 1092-1 table for DN450 PN25
- Heat number stamped on the rim; EN 10204 3.1 certificate issued
- PMI on stainless and alloy heats; UT/RT on request
- Anti-rust oil, plywood case or pallet, with packing list and MTC
- Typical lead time 7–15 days for carbon steel stock sizes, 20–30 days for alloys
Other sizes in PN25
Request a quotation
DN450 PN25 Slip-On (type 12) Flange
Tell us the quantity, face type, material and delivery port. We will confirm price, lead time and the applicable certificate within one business day.
Send an Inquiry
Send drawings, dimensions or a standard reference. Our sales engineers reply within 24 hours on business days.