EN 1092-1 · P250GH / S235JR · stock and made to order
DN200 PN6 Weld Neck (type 11) Flange — EN 1092-1
DN200 PN6 weld neck flange to EN 1092-1, machined from P250GH / S235JR. Outside diameter 320 mm, thickness 20 mm, 8 bolt holes on a 280 mm circle, approximate weight 8.6 kg. Available with raised face, flat face or the facing specified on your drawing.
Size
DN200
Standard
EN 1092-1 (EN 1092-1:2018)
Pressure rating
PN6
Outside diameter
320 mm
Thickness
20 mm
Bolt circle
280 mm
Approx. weight
8.6 kg
Full dimensions — DN200 PN6
| Size | DN | OD | Thickness | RF Ø | Bolt circle | Bolts | Hub Ø | Length | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|
| DN10 | 10 | 75 mm | 12 mm | 35 mm | 50 mm | 4 × Ø11 mm | — | — | — | Details → |
| DN15 | 15 | 80 mm | 12 mm | 40 mm | 55 mm | 4 × Ø11 mm | 30 mm | 30 mm | 0.4 kg | Details → |
| DN20 | 20 | 90 mm | 14 mm | 50 mm | 65 mm | 4 × Ø11 mm | 38 mm | 32 mm | 0.6 kg | Details → |
| DN25 | 25 | 100 mm | 14 mm | 60 mm | 75 mm | 4 × Ø11 mm | 42 mm | 35 mm | 0.8 kg | Details → |
| DN32 | 32 | 120 mm | 14 mm | 70 mm | 90 mm | 4 × Ø14 mm | 55 mm | 35 mm | 1.1 kg | Details → |
| DN40 | 40 | 130 mm | 14 mm | 80 mm | 100 mm | 4 × Ø14 mm | 62 mm | 38 mm | 1.3 kg | Details → |
| DN50 | 50 | 140 mm | 14 mm | 90 mm | 110 mm | 4 × Ø14 mm | 74 mm | 38 mm | 1.4 kg | Details → |
| DN65 | 65 | 160 mm | 14 mm | 110 mm | 130 mm | 4 × Ø14 mm | 88 mm | 38 mm | 1.8 kg | Details → |
| DN80 | 80 | 190 mm | 16 mm | 128 mm | 150 mm | 4 × Ø18 mm | 102 mm | 42 mm | 2.9 kg | Details → |
| DN100 | 100 | 210 mm | 16 mm | 148 mm | 170 mm | 4 × Ø18 mm | 130 mm | 45 mm | 3.4 kg | Details → |
| DN125 | 125 | 240 mm | 18 mm | 178 mm | 200 mm | 8 × Ø18 mm | 155 mm | 48 mm | 4.7 kg | Details → |
| DN150 | 150 | 265 mm | 18 mm | 202 mm | 225 mm | 8 × Ø18 mm | 184 mm | 48 mm | 5.5 kg | Details → |
| DN200 (this size) | 200 | 320 mm | 20 mm | 258 mm | 280 mm | 8 × Ø18 mm | 236 mm | 55 mm | 8.6 kg | Details → |
| DN250 | 250 | 375 mm | 22 mm | 312 mm | 335 mm | 12 × Ø18 mm | 290 mm | 60 mm | 11.7 kg | Details → |
| DN300 | 300 | 440 mm | 22 mm | 365 mm | 395 mm | 12 × Ø22 mm | 342 mm | 62 mm | 15.3 kg | Details → |
| DN350 | 350 | 490 mm | 22 mm | 415 mm | 445 mm | 12 × Ø22 mm | 385 mm | 62 mm | 20.3 kg | Details → |
| DN400 | 400 | 540 mm | 22 mm | 465 mm | 495 mm | 16 × Ø22 mm | 438 mm | 65 mm | 23.1 kg | Details → |
| DN450 | 450 | 595 mm | 22 mm | 520 mm | 550 mm | 16 × Ø22 mm | — | — | — | Details → |
| DN500 | 500 | 645 mm | 24 mm | 570 mm | 600 mm | 20 × Ø22 mm | 538 mm | 68 mm | 30.8 kg | Details → |
| DN600 | 600 | 755 mm | 30 mm | 670 mm | 705 mm | 20 × Ø26 mm | 640 mm | 70 mm | 44 kg | Details → |
Published EN 1092-1 dimensions for every PN6 size in this product family.
Dimensions in millimetres. Bolt hole diameter applies to through-holes. For stud length, gasket and bolting selection, match the gasket and bolts to EN 1092-1.
What PN6 means in service
PN6 is a nominal pressure of 6 bar (0.6 MPa) at ambient temperature for EN material group 1, derating with temperature per EN 1092-1.
EN 1092-1 uses PN (nominal pressure) ratings in bar: PN6, PN10, PN16, PN25 and PN40. PN16 means 16 bar nominal at ambient temperature for EN material group 1, derating with temperature per the EN 1092-1 tables. EN PN ratings are not equivalent to ASME classes in dimensions, even where the pressure looks similar.
Facing and materials
Raised face (RF) with a 2 mm face height is standard; flat face (FF) and groove (tongue) facings are available.
- P250GH
- P265GH
- S235JR
- S355J2
- 1.4301 / 1.4404
- 1.4571
Other grades, impact-tested heats and NACE MR0175 requirements are quoted on request. Material certificates to EN 10204 3.1 are issued against the same heat number as the dimensional report.
Inspection and delivery
- Dimensional inspection against the EN 1092-1 table for DN200 PN6
- Heat number stamped on the rim; EN 10204 3.1 certificate issued
- PMI on stainless and alloy heats; UT/RT on request
- Anti-rust oil, plywood case or pallet, with packing list and MTC
- Typical lead time 7–15 days for carbon steel stock sizes, 20–30 days for alloys
Other sizes in PN6
Request a quotation
DN200 PN6 Weld Neck (type 11) Flange
Tell us the quantity, face type, material and delivery port. We will confirm price, lead time and the applicable certificate within one business day.
Send an Inquiry
Send drawings, dimensions or a standard reference. Our sales engineers reply within 24 hours on business days.